Get a Free Quote
West London

Air Conditioning Fitters in Hammersmith and Fulham

A compact, densely built borough running from White City and Old Oak down to the Thames at Fulham and Sands End. We install, service and repair air conditioning in its converted terraces, mansion flats, riverside developments, offices, studios and restaurants.

Get a Free Quote Explore local services
  • W6
  • W12
  • W14
  • SW6

Free quote in Hammersmith and Fulham

Homes and businesses: tell us what you need and we’ll be in touch.

Tall Terraces, Mansion Blocks and Media Campuses Between the Westway and the Thames

Hammersmith and Fulham packs a great deal into a small area. In the north, Shepherd's Bush, White City and Wormholt mix Victorian terraces with large housing estates, Westfield London, the former BBC Television Centre and Imperial College's White City campus, while Old Oak is the focus of major long-term regeneration. The centre of the borough has Hammersmith's office district around the Broadway and King Street, the mansion blocks of Brook Green and West Kensington, and the riverside terraces near the bridge and Ravenscourt Park.

Housing is dominated by tall Victorian and Edwardian terraces, many converted into two or three flats, alongside red-brick mansion blocks and a growing number of modern riverside and regeneration apartments. Gardens are small, lightwells are common and most flats are leasehold, so almost every project here begins with questions about consent and condenser siting before equipment is discussed. Parking is controlled across almost every street, which also shapes how installations are planned.

This page covers the borough as a whole. Fulham, the southern half, has its own dedicated page for its terraced family streets, Parsons Green and the riverside developments around Sands End and Imperial Wharf. A W12 conversion, a W14 mansion flat, a W6 office and an SW6 house all follow the same principles: short pipe runs, careful siting, the right consents and quiet equipment.

Our services

Flat, House and Office Cooling Across Hammersmith and Fulham

A quiet air conditioning unit in a child’s bedroom, the kind of air conditioning we fit for homes in Hammersmith and Fulham
A quiet air conditioning unit in a child’s bedroom. An example of the air conditioning we install for homes in Hammersmith and Fulham.

For homes

Residents in the borough most commonly ask about cooling top-floor bedrooms, loft conversions and open-plan kitchen extensions with glazed roofs. In a borough dominated by flats and terraces, the answer is usually one or two compact split units, or a twin-split serving two rooms from one condenser, rather than a whole-house system. We help you understand which consents may be needed, recommend suitable equipment and install, commission and service it, covering every neighbourhood from Wormholt and White City to Sands End.

Domestic air conditioning
A row of outdoor air conditioning condensers at a commercial building, the kind of commercial air conditioning we fit for businesses in Hammersmith and Fulham
A row of outdoor air conditioning condensers at a commercial building. An example of the commercial air conditioning we install for businesses in Hammersmith and Fulham.

For businesses

The commercial sector is significant, with offices around Hammersmith Broadway and King Street, media, research and technology businesses in White City, retail at Westfield and Shepherd's Bush, and countless restaurants, cafés and gyms. We install VRF and multi-zone systems for offices, ceiling cassettes for shops and hospitality, and dedicated cooling for comms rooms and edit suites. Maintenance contracts and repair visits keep systems running, and in tenanted buildings we coordinate with landlords and facilities teams on access and permits.

Commercial air conditioning
Air Conditioning Installation in Hammersmith and Fulham: a split air conditioning unit above a living room fireplace

Air Conditioning Installation

Surveyed, heat-load sized and properly commissioned air conditioning for London homes and businesses, from a single wall unit to multi-room and ducted systems.

Learn more Air Conditioning Repairs in Hammersmith and Fulham: a wall-mounted air conditioning unit during a service visit

Air Conditioning Repairs

Symptom-led fault finding for air conditioning that has stopped cooling, is leaking, icing up, tripping the electrics or showing an error code anywhere in London.

Learn more Air Conditioning Servicing in Hammersmith and Fulham: an air conditioning unit display showing the set temperature and Wi-Fi

Air Conditioning Servicing

A single, thorough service visit covering filters, coils, drains, fans, electrics and refrigerant performance, with readings recorded for homes and businesses across London.

Learn more

How Do You Get Consent for AC in a Hammersmith Mansion Block or Conversion?

In a borough where most homes are leasehold flats, consent is the first hurdle and often the longest. Preparing the right information for the freeholder or managing agent makes approval more likely and speeds up the process considerably.

What managing agents usually want to see

Mansion block landlords and managing agents typically ask for the proposed condenser position, pipe route, method of fixing, product data sheets showing sound levels, and confirmation of who will maintain the equipment. Some require a formal licence for alterations and charge a fee for their surveyor to review it. Providing clear technical details at the outset avoids back-and-forth.

Lightwells and internal courtyards

Many mansion blocks have internal lightwells where a condenser is invisible from the street. They can work well, but airflow must be adequate so hot discharge air does not recirculate, and neighbours' windows opening onto the lightwell need consideration.

Converted terraces with a single freeholder

In a Shepherd's Bush or Askew Road terrace split into flats, the freeholder may be a small company owned by the leaseholders themselves. Consent can be quicker, but other flat owners will want reassurance about noise, appearance and access to the roof or rear wall. A neat, short pipe run and a quiet condenser on the outrigger roof usually address those concerns.

Twin-splits to reduce external equipment

Where a flat needs two rooms cooled, a twin-split uses one condenser for both. That halves what appears on the outside of the building, which freeholders and conservation officers tend to prefer.

Climate Control for Offices, Studios and Restaurants Around the Broadway

Commercial space in the borough ranges from glass-fronted office blocks to converted warehouses, media studios and busy restaurants. High occupancy, equipment loads and glazing all push cooling demand up, and limited roof space shapes the plant layout.

VRF and multi-zone systems for open-plan floors

Offices with sunny window desks, internal meeting rooms and server cupboards need different temperatures at the same time. VRF systems serve many indoor units from shared outdoor plant, with heat recovery models moving energy from warm zones to cool ones. Ducted units keep reception areas clean, while cassettes suit suspended ceilings in working areas.

  • Zone by orientation as well as by room
  • Keep comms-room cooling independent of office plant
  • Plan roof plant positions with the landlord early

Edit suites, studios and equipment-heavy rooms

Media and research spaces in White City often have racks of equipment, lighting and screens running for long hours. These rooms are sized on actual heat output, with quiet indoor units so recording or editing is not disturbed, and controls that allow cooling outside normal office hours.

Restaurants and gyms on King Street and Shepherd's Bush Green

Dining rooms and gyms see rapid swings in occupancy and heat. Ceiling cassettes with good air throw keep customers comfortable, while kitchen extraction remains a separate system. Filters and coils in these settings need more frequent cleaning to maintain performance.

Local properties

Building Types That Shape Installations in W6, W12, W14 and SW6

Mansion flats in Brook Green, West Kensington and Barons Court

Red-brick mansion blocks have solid walls and generous ceiling heights, but external changes are tightly controlled by the lease and the managing agent. Where consent is given, a wall-mounted or floor-standing indoor unit with the condenser in an internal lightwell, on a rear roof or in an approved plant area is the typical solution.

Converted terraces in Shepherd's Bush, Askew and Ravenscourt Park

Upper-floor flats and loft conversions overheat under slate roofs. Compact split systems with short pipe runs to a rear outrigger roof or back wall are the usual approach, subject to freeholder agreement and any conservation area restrictions on visible positions.

White City, Old Oak and riverside new builds

Recent developments are well insulated and highly glazed, so solar gain makes them warm by late afternoon. Many include plant space, comfort cooling or design provisions for future installation, so check what your building allows and whether existing services can be extended before planning anything independently.

Offices, studios and hospitality around Hammersmith Broadway and White City

Offices near the Broadway, media and technology businesses in White City and restaurants on King Street and Shepherd's Bush Green need flexible climate control. VRF multi-zone systems, ceiling cassettes and ducted units suit open-plan floors, meeting rooms, edit suites and dining rooms with high equipment and occupancy loads.

Before you install

Leasehold Consents, CPZs and Conservation Areas in Hammersmith and Fulham

This is general guidance only. Every building, lease and planning situation is different, so we’ll talk through yours at survey stage.

  1. 01Much of the borough is covered by conservation areas, from Brook Green and Ravenscourt to large parts of Fulham. Condensers on front elevations or roofs visible from the street are likely to need planning permission, so check with the council's planning team at an early stage.
  2. 02Most flats here are leasehold. Written consent from the freeholder or managing agent is normally needed before any external unit, bracket or core hole, and mansion block landlords may ask for drawings, product data sheets and noise levels.
  3. 03Rear gardens and lightwells are often small and overlooked by several neighbours. A quiet outdoor unit on anti-vibration mounts, placed away from bedroom windows, reduces the chance of noise complaints in such close quarters.
  4. 04Controlled parking zones operate across almost all streets. Installers may need a visitor permit or a bay suspension, which takes time to arrange, so plan it with the household well before the installation date.
  5. 05Riverside properties along the Thames can sit in areas with flood risk. Raised brackets keep condensers and isolators clear of standing water and debris.
Pricing explained

Why Inner-Borough Access and Consents Affect Your Quote

In Hammersmith and Fulham the equipment is often modest, but access, consents and siting add effort that suburban installations rarely face. Quotes separate equipment, labour, materials, electrical work, access arrangements and commissioning so each driver is visible.

Condenser position and roof access

Lifting a condenser onto an outrigger roof, into a lightwell or onto a mansion block roof may require scaffold towers, roof access equipment or carrying through communal areas, all of which add time compared with a ground-level position.

Pipe routes through tall terraces

Top-floor flats can be several storeys above the only available condenser position. Longer vertical runs, internal boxing and neat external trunking on rear elevations increase materials and labour.

Parking suspensions and permits

Bay suspensions or visitor permits in controlled parking zones, plus any managing agent requirements for method statements or insurance documents, influence scheduling and preparation time.

Commercial zoning and out-of-hours work

Offices, studios and restaurants with many zones, high heat loads or a need for evening and weekend installation have more complex quotes, with VRF plant, controls integration and comms-room cooling itemised separately.

Step by step

Four Stages from Consent to Commissioning in a Dense Inner Borough

  1. Initial details and consent check

    Tell us whether you own the freehold, are a leaseholder or a tenant, and describe the rooms or spaces needing cooling. We explain what a freeholder, managing agent or planning team is likely to need before any survey is booked.

  2. Survey of rooms, routes and access

    We measure rooms and glazing, identify condenser positions on rear roofs, lightwells or plant areas, map pipe routes through the building and check electrical capacity. Parking and communal access are discussed at the same visit.

  3. Proposal pack for approval

    You receive a written quote plus product data, sound levels and a description of positions and fixings that can be passed to a freeholder, managing agent or the council to support any consent application.

  4. Installation, commissioning and servicing

    Once approval is in place and parking arranged, we install, pressure-test and commission the system, protect communal areas, explain the controls and offer annual or planned servicing to keep it running quietly.

FAQs

What H&F Leaseholders, Landlords and Businesses Ask Us

Can I have air conditioning in a mansion block flat in Brook Green or West Kensington?

It may be possible, but mansion blocks usually have strict rules on external equipment. Start by checking your lease and asking the managing agent. If a condenser on the facade is not allowed, there may be alternatives such as an internal lightwell or an approved plant area. We can supply product details and sound levels to support the request.

How do conservation areas affect where the outdoor unit goes?

Many streets in the borough are within conservation areas, where condensers visible from the road or mounted on roofs may need planning permission. Units on rear elevations that cannot be seen from public areas are less likely to be an issue, but it is always worth checking with the council's planning team before installation.

Can you install office air conditioning near Hammersmith Broadway?

Yes. We design and install systems for offices of all sizes, from small suites above shops to open-plan floors. Multi-zone and VRF systems allow different areas to be controlled separately, which helps with meeting rooms and sunny desks by the windows. Installation can take place outside business hours to reduce disruption to staff.

How will the installers park on my street?

Most streets in the borough are within controlled parking zones. Depending on the location, we may use a visitor permit provided by the household or arrange a bay suspension through the council, which needs notice. We discuss parking during the survey so it is organised well before the installation date.

My top-floor flat in Shepherd's Bush overheats. What system would suit it?

A wall-mounted split in the bedroom, and possibly a second unit in the living room on a twin-split, is the usual answer. The condenser normally goes on the rear outrigger roof or a high bracket on the back wall, with pipework run neatly down the rear elevation or internally. Freeholder consent is normally needed before installation.

Do you cover Fulham as well as Hammersmith and Shepherd's Bush?

Yes. We cover the whole borough, from White City and Wormholt in the north to Parsons Green, Fulham Broadway and Sands End by the river. Fulham has its own page with more detail on its terraced streets and riverside developments, but the same survey, consent and installation approach applies throughout.

Districts and Boroughs Surrounding Hammersmith and Fulham

Free quote

Request a Survey for Your Flat, House or Office in H&F

Tell us about your home or business in Hammersmith and Fulham and what you’d like to achieve, whether that’s cooling, heating or both. We’ll come back with advice and next steps.

  • Survey-led advice: recommendations based on your rooms, layout and how you use the space.
  • Clear written quotation: what’s included, the equipment proposed and the next steps.
  • No obligation: ask questions and take your time to decide.
  • CoverageHomes & businesses across Greater London

Request your free quote

A few details help us understand your property and come back with useful advice.

Fields marked * are required. We only use your details to respond to this enquiry.
Get a Free Quote